Sencorp HP-12 Inline Blister Former/Sealer Stainless Steel
Stock Number: 4179
Sencorp HP-12
Click to view larger photo
Equipped With:
Sencorp model HP-1000 thermoformer, blister transfer and HP-12 inline sealing system Last ran lip care product on 12 up and 8 up at 18 cycles per minute.
Thermoformer spec:
Unwind station - 21" max roll O.D., 24.50" max roll width, 500 lb max weight
Oven station - upper contact heater which heats the sheet in the area to be thermoformed
Form & trim in place press - 10" max mold size, 24 ton clamp force, 8" top & bottom shut height from sheet line, 3.50" upper and lower platen travel, 0.19" lower platen bump travel
Blister stripper station
Blister transfer station with X-Y spreader
Sheet transfer system - chain rail adjustment 7.50" - 23", Max sheet width 24.50", Min sheet width 9.25", sheet thickness .005"-.02"
Scrap roll rewind station - Max roll O.D. 14", max roll width 24.50"
Blister sealer spec:
Automatic card placement system - pneumatically denest cards from magazine and place into the tray carriers
Digital programmer
Six (6) open product loading stations - 72" on each side of machine
High speed low profile sealing press - top/bottom moving platens with up to 2.5 tons seal force
Heat seal area - 21" x 9.75" Machine index - 12"
Motorized cam operated indexer - DC drive to monitor the speed of the conveyor, dry cycle rate 25 cycles per minute Product pick and place and 90 degree rotate system - picks finished product and rotates 90 degrees
Electrics: 3/60/208V
Tristar Machinery
1287 Naperville Drive
Romeoville, IL 60446
630-771-9035
630-982-0999
info@tristarmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
